Preparation of Nano-silica and Nano-silicone from Glass Wastes

(Abdulrazzaq A. Hammal)

---

Abstract

In this research, silica and silicon were prepared using glass waste. The preparation process consisted of several stages that started with the collection of crushed glass samples, treating them physically (grinding and granular sorting) and mixing granulated crushed glass with NaOH at ratios of 1:1, 1:2 and 1:3. In a laboratory furnace, treatment at different temperatures (800, 900 and 1000 °C) was performed. Then, the sample was treated with diluted HCl (1:1) with heating to 60 °C to isolate the silica; after that, it was treated at 900 °C for 30 min to form SiO2 nanoparticles with a yield of 68% and a purity of up to 99.5%. The resulting silica (SiO2) was characterised by XRD and AFM techniques. Results from the two- and three-dimensional images captured by AFM showed the formation of silica nanotubes with a surface roughness (Ra) of 78 nm. Silicon nanoparticles were prepared from silica by mixing it with magnesium at a ratio of 1:2. The mixture was then treated at different temperatures (700, 750, 800 and 900 °C), treated with HCl, treated with HF to get rid of the secondary compounds and heated to 800 °C to obtain silicon with a yield of 90%. Analysis using XRD and AFM techniques proved the formation of silicon nanostructure with an Ra of 286 nm.
KEYWORDS
glass, industrial waste, magnesiothermic reduction, nanotechnology, silica, silicon

PDF

References

Al-Abboodi, S.M.T., Al-Shaibani, E.J.A. and Alrubai, E.A. (2020). Preparation and characterization of nano silica prepared by different precipitation methods. In: IOP Conference Series: Materials Science and Engineering, 978(n/a), 012031. DOI: 10.1088/1757-899X/978/1/012031
Al-Azzawi, O.M., Hofmann, C.M., Baker, G.A. and Baker, S.N. (2012). Nanosilica-supported polyethoxyamines as low-cost, reversible carbon dioxide sorbents. Journal of Colloid and Interface Science, 385(1), 154–9. DOI: 10.1016/j.jcis.2012.07.001
Azam-Rasouli, M.G., Tsoutsouva, S.J. and Tranell, G. (2022). Kinetics of Magnesiothermic Reduction of Natural Quartz. Materials, 15(19), 6535. DOI: 10.3390/ma15196535
Battaglia, C., Cuevas, A. and De Wolf, S. (2016). High-efficiency crystalline silicon solar cells: Status and perspectives. Energy and Environmental Science, 9(5), 1552–76. DOI: 10.1039/c5ee03380b
Bernardis, S. (2012). Engineering Impurity Behavior on the Micron-scale in Metallurgical-grade Silicon Production. PhD Thesis, Massachusetts Institute of Technology, Cambridge, Massachusetts, United States.
Farirai, F., Ozonoh, M., Aniokete, T.C., Eterigho-Ikelegbe, O., Mupa, M., Zeyi, B. and Daramola, M.O. (2020). Methods of extracting silica and silicon from agricultural waste ashes and application of the produced silicon in solar cells: a mini review. International Journal of Sustainable Engineering, 14(1), 57–78. DOI: 10.1080/19397038.2020.1720854
Gielen, D., Boshell, F., Saygin, D., Bazilian, M.D., Wagner, N. and Gorini, R. (2019). The Role of Renewable Energy in the Global Energy Transformation. Energy Strategy Reviews, 24(24), 38–50. DOI: 10.1016/j.esr.2019.01.006 
Juenger, M.C.G. and Ostertag, C.P. (2004). Alkali–silica reactivity of large silica fume-derived particles. Cement and Concrete Research, 34(8), 1389–402.  DOI: 10.1016/j.cemconres.2004.01.001
Karpukhina, N., Hill, R.G. and Law, R.V. (2014). Crystallisation in oxide glasses–a tutorial review. Chemical Society Reviews, 43(7), 2174–86. DOI: 10.1039/c3cs60305a
Kovacec, M., Pilipovic, A. and Stefanic, N. (2011). Impact of glass cullet on the consumption of energy and environment in the production of glass packaging material. Recent Researches in Chemistry, Biology, Environment and Culture, n/a(n/a)‏ , 187–92.
Kumar, M. (2020). Social, economic and environmental impacts of renewable energy resources. In: K.E. Okedu, A. Tahour and A. Aissaou (eds). Wind solar hybrid renewable energy system. London, United Kingdome: IntechOpen Limited. DOI: 10.5772/intechopen.89494
Luo, Z., Cai, X., Hong, R.Y., Wang, L.S. and Feng, W.G. (2012). Preparation of silica nanoparticles using silicon tetrachloride for reinforcement of PU. Chemical Engineering Journal, 187(n/a), 357–66. DOI: 10.1016/j.cej.2012.01.098
Mammeri, F., Rozes, L., Sanchez, C. and Bourhis, E.L. (2003). Mechanical properties of SiO2-PMMA based hybrid organic-inorganic thin films. Journal of Sol-gel Science and Technology, 26(1-3), 413–7. DOI: 10.1023/A:1020789602816
Oki M., Rebrov, E.V., Tetyana K., Brian, K.P.J., Lafont, U., M.H.J.M. de Croon and Schouten, J.C. (2008). Mesoporous silica films as catalyst support for microstructured reactors: Preparation and characterization. Chemical Engineering Journal, 135(n/a), S99–S103. DOI: 10.1016/j.cej.2007.07.023
Pei, F., Zhu, G., Li, P., Guo, H. and Yang, P. (2020). Effects of CaF2 on the sintering and crystallisation of CaO–MgO–Al2O3–SiO2 glass-ceramics. Ceramics International, 46(11,A), 17825–35. DOI: 10.1016/j.ceramint.2020.04.089
Shahsavari, A. and Akbari, M. (2018). Potential of solar energy in developing countries for reducing energy-related emissions. Renewable and Sustainable Energy Reviews, 90(90), 275–91. DOI: 10.1016/j.rser.2018.03.065
Yan, F., Jiang, J., Chen, X., Tian, S. and Li, K. (2014). Synthesis and Characterization of Silica Nanoparticles Preparing by Low-Temperature Vapor-Phase Hydrolysis of SiCl4. Industrial & Engineering Chemistry Research, 53(30), 11884–90. DOI: 10.1021/ie501759w
Yang, X., Huang, C., Fu, Z., Song, H., Liao, S., Su, Y. and Li, X. (2013). An effective Pd-promoted gold catalyst supported on mesoporous silica particles for the oxidation of benzyl alcohol. Applied Catalysis B: Environmental, 140(n/a), 419–25. DOI: 10.1016/j.apcatb.2013.04.029
Zhang, H., Zhao, X., Ding, X., Lei, H., Chen, X., An, D., Li, Y. and Wang, Z. (2010). A study on the consecutive preparation of d-xylose and pure superfine silica from rice husk. Bioresource Technology, 101(4), 1263–7. DOI: 10.1016/j.biortech.2009.09.045
Zhang, Z., Wang, J., Liu, L. and Shen, B. (2019). Preparation and characterization of glass-ceramics via co-sintering of coal fly ash and oil shale ash-derived amorphous slag. Ceramics International, 45(16), 20058–65.‏ DOI: 10.1016/j.ceramint.2019.06.269